LN-100 (Layout Navigator)

April 21, 2015 In Robotic

Layout

By one-person, simple operation, quickly !!

  • LN1Layout dan Topo measurement with extremely simple operation.
  • Simple instrument set up with Automatic leveling
  • Android Terminal as controller
  • One-person layout by Automatic Target Tracking
  • Compact and Light weight design
  • TSshield equipped onboard

Simple, Easy and straightforward operation

LN-2Automatic Self-levelling

After the Power is turned ON, the instrument automatically starts leveling itself,with internal precise tilt sensor and motorized mechanism. Conventional way for leveling the instrument with food screws were totally eliminated.

 chose set up modeChoose set up method

For setting up instrument at any given point, 4 methods are supported, in order to flexibility adapt to different situations of known point avability at the construction site. This will help easy orientation of the instrument.

android terminal controllerAndroid set up method

Android terminal can be used as a controller of the instrument and measurement. The exclusive control software, “Top Layout” is a free software. Transferring design or measured coordinate data can be done directly with PC or through e-mail or cloud server using on the Android terminal. With this communications functions, field and office are connected effectively.

 wide working coverageWide Working Coverage

The measurement can be performed in 200m diameter area centered by the instrument and within ±10m elevation difference between the instrument and prism. This eliminates unnecessary change of instrument location, therefore, improve efficiency of entire measuring or layout work.

Functions for Speedy Stakeout works, improves efficiency 30%

guide lightGuide Light — Brig to recognize

The Guide Light guides operator to instantly recognize the line between the instrument and the selected stake out point, with clearly visible Green and Red lights.

high speedHigh speed position update

Prism position on the terminal display is updated 20 times/second, which enables very smooth trace of prism movement, without feeling delay, and therefore, locating prism precisely to the stake out point.

both handsBoth hands can be used

Holding the terminal on the arm holder, both hands become usable which greatly improves speed and efficiency of works to drive in stakes or nails.

special algorithmSpecial algorithm

Actual layout work flow were carefully examined and an exclusive algorithm was employed to most suit to actual work flow through putting stakes/nails to measure and record stake/nail positions.

After once the prism is laid down to the ground and plumbed again after putting the stake, the instrument will immediately and automatically re-lock the prism. Therefore, the operator does not need to care instrument status nor control the instrument to search and lock the prism and can concentrate to put the stake and measure its position. The works necessary o be done at the stake out point can be very efficiently accomplished.

Model LN-100
Measuring Range
Distance 0.9 – 100m*1
Vertical range (at 0.9 to 22m distance) ±25°
(at 22m to 100m distance) ±10m
Horizontal range 360°
Positioning Accuracy H : 1.5mm@50m
V: 3.0mm@50m
Measuring Accuracy ±3mm (Distance)/5″(Angle)
Automatic Levelling
Levelling range ±3°
Tilt Correction
Type 2-Axis Liquid Compensator
Working range 360° (Horizontal), ±25°(Vertical)
Automatic Tracking
Tracking range 0.9 – 100m*1
Working range 360° (Horizontal), ±25°(Vertical)
Max. Rotation speed 60°/sec (=10 rpm)
Guide Light
Light Source LED (Red 626nm/Green 524nm)
Visible range Horizontal > 8°(7m at 50m distance)
Laser Plummet
Light Source LED 635nm
Wireless LAN 802.11 n/b/g
Communication range 100m2
Battery
Type Standard : BDC70 (Lithium Ion battery)
Operating Time Approx. 5 hours (continous use, at 20°C)
Dimensions 185 (W) x 196 (D) x 29e5 (H) mm
Weight 4.0 kg (including battery BDC70)
Ambient Temperature
Operation -20 – +50°C
Storage 30 – +60°C
Immersion Protection IP 65

Comments are closed.